Ideas & solutions for 3 Red Rings Of Death Fix
If your Xbox is showing you the dreaded three red rings of death, you have cause to be greatly concerned. This condition is caused by overheating. Too much heat to the motherboard causes it to bend or deform. This will loosen the solder connections of the graphics processing unit to the motherboard. The loose GPU is what triggers the three red trouble shooting lights.
There are several easy approaches to a so-called “3 red rings of death fix” which may be necessary for many Xbox 360 devices. Unfortunately, over 10,000,000 of them were manufactured with fatal design flaws leading to hardware failure among other unpleasant outcomes. If a red light suddenly appears, you are being informed that your machine has developed a problem which must be dealt with.
One red light indicates that your console has some hardware problem and you need to do some action for repairing it. Two red lights indicate that your machine is getting overheated. You need to put it off and relocate it and preferably keep your console at an open place. Three red lights or three 3 red rings of light indicate that your console has red rings of death and you need to take action to rectify the problem. If you are getting four red lights, your cable is probably damaged and therefore need to check and if required replace the cable.
If your warranty period is expired and you want 3 red rings of death fix, you need to either send your console directly to Microsoft or you need to do the task yourself. If you choose to get red ring of death fixed by Microsoft, you need to ship your console to Microsoft and further you will need to send $140. The major disadvantage of sending your console to Microsoft is that you will have to wait for over a month to get back your gaming console.
Another choice you have is to fix it yourself. A DIY (do it yourself) guide can be purchased inexpensively and by following the instructions, you can fix the 3 red circles of death-doom in about an hour and a half. Do the following steps: take off the case; remove the x clamp; unscrew and take out the heat sink; clean both the CPU and the GPU; apply thermal compound to the GPU; put 2 nylon washers over and under where the screws fit into the heat sink. Then you screw the heat sink on again and reassemble everything.
Another excellent benefit of the Do It Yourself guide is the simplicity with which you can master it. This allows you to be able to fix any console problems that come up rather than having to send the console back to the company each time to have it fixed (such as when it indicates the so-called “red rings of death”). It is both simple and safe to do your own repairs, and you will find all of the information necessary to do so well laid out for you.
If your X-box is showing you the dreaded 3 rings of light, you have cause to be greatly concerned. There are several easy approaches to a so-called “three red rings of death fix” which may be necessary for many X-box 360 devices. Unfortunately, over ten million of them were manufactured with fatal design flaws leading to hardware failure among other unpleasant outcomes. The cheapest choice you have is to fix it yourself. A do it yourself guide can be purchased inexpensively and by following the instructions, you can fix the three 3 red circles of death in about an hour and a half.
- david shell
